Skip to content

What Is A Room Thermostat And How To Use It?

You decide to buy room thermostat. But you hesitate on terms of its features, and uninformed of its benefits. In that case, this article is totally for you!

Room thermostat is used to set desired room temperature by informing used heating appliances. There are wireless, wired, programable and remote control models of room thermostats. Room Room thermostat sends information for operate of heating appliance until arrives to desired temperature by measuring ambient temperature. And when the ambient temperature arrives to desired, room thermostat informs to heating appliance about arrived desired temperature and issues a command it for have a break of heating. For example, if you adjust your room thermostat to 23 degrees, your boiler stops to heating when the ambient of room which thermostat placed reached to 23 degrees.

Room thermostats provide both comfort and saving on using fuel. You should try the following methods for best savings.

You decided to use room thermostat and you connected your room thermostat to the heating system. Primarily, the temperature degree of hermatic or condensing boiler should be between 55-56 degrees. The purpose of that high degree is reaching to desired temperature immediately on house or place and stopping of boiler.

You should keep the thermostats approximately on 22 degrees and decrease till 18-19 degrees at night. You should ventilate your home at the morning hours and you should be sure that your room thermostat is closed.

The room thermostat used for combi boilers and heating devices allows you to easily adjust the temperature of your room to the desired degree. The task of the room thermostat is to keep the temperature constant when the temperature of the room reaches the desired degree and to prevent the boiler from working too much.

Wireless room thermostats consist of a combination of two devices, a receiver (modem) and a transmitter (room thermostat). First of all, the receiver device must be installed in the boiler. There are LED lights on it that provide information about the connection status with the boiler. The transmitter device is a thermostat that can be mounted on the desired wall of the house or that you can use with a table apparatus, which allows you to easily set the temperature, measure the room temperature and ensure that the boiler works or not. You can set the degree of room temperature through the room thermostat as you like.

Room thermostats can provide communication between two devices by using different communication units. This communication can be Wi-Fi, radio frequency and wired connection. These situations differ for each device model. In order to choose the most suitable room thermostat for you, you should consider elements such as the mode of use, the desired positioning location, the desired extra modes.

In a boiler with a room thermostat, all you have to do is set the desired temperature through the device. When the room temperature reaches the degree you have set, the boiler turns off. When it falls below the degree you have set due to a heat loss, the boiler continues to heat the environment until it reaches the desired degree again. Thus, you will not need to constantly update. As you can control the room temperature from the LED panel on the thermostat, you will also save on natural gas due to the automatic management of the thermostat.

Things To Be Considered:

Without a battery or with a dead battery, the thermostat will not work. Therefore, when you see the battery depletion warning on the device, you should replace the battery. In the event of a power outage with smart room thermostats, the room thermostat continues to control the boiler according to the last set temperature. When the electricity is turned on again, the connection takes place again.