Skip to content

Термостат Напольного Отопления THERMA FH26S

Теперь стало проще и эффективнее устанавливать температуру по вашему желанию. Термостат для напольного отопления поможет вам точно контролировать температуру в вашем доме. Вы можете сэкономить энергию и оптимизировать свой комфорт. Благодаря простоте установки начните использовать его сразу же и отрегулируйте температуру вашего дома по своему вкусу. Контроль температуры осуществляется одним касанием!

Вы можете добиться максимальной экономии и комфорта, управляя системами напольного отопления, которые предпочтительны для обеспечения комфортного климата в помещении, повышения энергоэффективности и достижения эстетичного внешнего вида, с помощью термостата для напольного отопления. Вы можете управлять термостатом для напольного отопления с помощью дополнительного подключения датчика пола или с измерением комнатной температуры.

Underfloor Heating Control

Optional Floor Sensor

Floor Overheat Protection

Adjustable Overheat Protection Range

Hysteresis Setting

Illuminated Display

Precise Temperature Measurement

230V Connection

Wired Connection

Surface Mounting

INCREASE HOME COMFORT AND SAVE ENERGY WITH THE OPTIONAL FLOOR SENSOR.

Optional Floor Sensor

The optional Floor Sensor continuously measures the floor temperature and transmits this information to the thermostat. Thus, temperature fluctuations are better balanced and you can maintain the desired temperature in every corner of your home. Especially in rooms with underfloor heating, this sensor makes it much easier to achieve ideal comfort.

*GENERAL Life floor sensor must be connected to the underfloor heating thermostat.

Overheat Protection

If the optional floor sensor is connected, the overheat protection will be active at 28°C. If the GENERAL Life floor sensor measures 1°C above the set temperature, your Room Thermostat will turn off the heating unit. If it measures 1°C below the set temperature, your Room Thermostat turns on the heating unit.

Thus, it provides savings and comfort by keeping the ambient temperature within a certain range.

*GENERAL Life floor sensor must be connected to the underfloor heating thermostat.

Floor Sensor Temperature Adjustment

If an optional floor sensor is connected, the floor sensor temperature setting must be adjusted. The factory temperature setting of the floor sensor is 28.0°C. This value can be adjusted between 23.0°C and 34.0°C. Floor sensor operating accuracy is 1.0°C.

*When the floor sensor temperature setting is 28.0oC, your heating unit stops when the floor temperature increases to 29.0oC, and your heating unit starts when it decreases to 27.0oC.

Hysteresis Setting

The room thermostat hysteresis setting determines how often or with how many degree differences the room thermostat will attempt to reach the desired temperature value. The hysteresis setting can be described as the operating sensitivity setting. The factory operating sensitivity of Room Thermostats is 0.5oC. This setting determines the difference between the set temperature on the room thermostat and the current temperature in the room. Operating sensitivity can be changed with hysteresis positive and hysteresis negative settings.

*When the operating sensitivity is 0.5oC, if you set the desired temperature to 23.0oC, your heating unit stops when the room temperature rises to 23.5oC, and your heating unit starts when it drops to 22.5oC.

Технические характеристики термостата для теплого пола THERMA FH26S

Размеры (В/Д/Ш)
85.7mm / 85.7mm / 33.5mm

Рабочий Ток
230V AC

Реле NO Ток Переключения
7 А (240VAC-Резистивная Нагрузка) 10 А (120VAC-Резистивная Нагрузка)

Точность Измерения Температуры
0.1°C

Рабочая Чувствительность
(-2.0°C) - (+2.0°C)

Диапазон Рабочих Температур
(5°C) – (30°C)

Рабочая Температура
(-10°C) – (+50°C)

Температура Хранения
(-20°C) – (+60°C)
Документы
Руководство Пользователя