Frequently Asked Questions
Smart Room Thermostat is a device that allows you to control your heating unit through the internet with the mobile application you install on your mobile phone, even when you are not at home.
Smart Room Thermostat measures the temperature of your home, keeps your home at the temperature you set, and allows you to turn your heating/cooling unit on or off whenever you want.
Heating/cooling units are indexed to heat/cool the water in the installation due to their working principle. In a scenario where your heating/cooling unit is a boiler and is set to 50°C, your boiler runs until it brings the water circulating in the installation to 50°C, regardless of the temperature of your home, and stops when it reaches 50°C. Although everything seems normal here, this system causes your monthly bills to be about 35% higher.
When the Room Thermostat is used, your boiler still operates at 50°C, but when your home reaches the desired temperature, the Room Thermostat turns off your boiler regardless of the temperature of the circulating water and prevents your boiler from running unnecessarily.
The savings rate with the Room Thermostat varies according to personal use. For maximum savings with your Room Thermostat, it is recommended to keep the room temperature at 22°C during the day and 18°C at night. A 1°C temperature difference affects your bills by 8%.
• Factors such as sun and insulation affect the temperature of your home. By using the Room Thermostat, you can make your heating/cooling unit run less when your home is exposed to sunlight.
• By keeping the temperature of your home constant at 22°C during the day, you will not spend unnecessary fuel and you can prevent energy loss due to the heating of the walls.
• By setting your room thermostat to 18°C during sleeping hours, you can have a healthy sleep and save money.
• By decreasing the temperature of your home when you are out, you can prevent unnecessary energy consumption and spend less energy when you want to reheat your home.
If your heating/cooling unit has on-off connections, all of our Room Thermostat models are compatible. You can find the necessary information about your heating/cooling unit in the user manual of your heating/cooling unit or by calling the service center of your heating/cooling unit.
Wireless Smart Room Thermostats can be controlled via your cell phone when powered by the battery. In this way, you can place your Wireless Smart Room Thermostat anywhere in your living space as recommended in the user manual.
*HT500S SMART works as a smart room thermostat when powered by the plug.
Room Thermostats do not interfere with the domestic water temperature, the installation, or the natural gas meter.
Choosing a Room Thermostat depends on your usage needs and design preferences. You can choose the most suitable product for your budget and usage among our products with alternative options such as wired, wireless, programmable, and smart.
You can buy a Room Thermostat from GENERAL Life stores on Trendyol, Hepsiburada, Amazon Türkiye, N11, D&R, and İdefix e-commerce platforms or from other sellers.
You can do the installation and assembly of the product yourself by following the instructions in the user manual, or you can request help from your service center if you wish. Service centers provide assistance for a service fee.
You can place your Room Thermostat in a room that you use frequently in your living space, such as a living room. Avoid installing it in places where there is a lot of air circulation, such as doorways or windowsills. Also, do not place it close to heating/cooling units ( radiator, air conditioner, etc.), and do not place it in direct sunlight. We recommend that the Room Thermostat should be placed at a height of 150 cm from the floor. You can try several places to find where you can place the Room Thermostat.
The cable specification that must be used in the Receiver assembly of the Smart Room Thermostat is 2*0.75.
The distance between the Smart Room Thermostats and the Receiver should not exceed 20 meters or 2 floors.
The points to be considered in the placement of the receiver are as follows;
- The receiver and the heating/cooling unit must not physically contact.
- It should be protected from external substances such as liquid, dust, etc.
- It should not be mounted on metal surfaces.
- It should not be installed close to electrical cables and electronic equipment such as computers and television units.
- It should not be installed near large metal structures or other building materials using thin metal mesh such as special glass or special concrete.
- The distance between the room thermostat and the receiver should not exceed 20 meters or 2 floors.
You can place your receiver at any location in your home by taking these points into consideration.
In Smart Room Thermostats, when you press the manual (M) button on the Receiver unit, the LED starts blinking and the Room Thermostat is deactivated. In this case, your heating/cooling unit continues to operate according to the installation water temperature.
If one of the sun or snow symbols is blinking on the display of your Room Thermostat, it means that your Room Thermostat is running the heating/cooling unit.
You can also see the running status of the heating/cooling unit from the LED meanings on the Receiver of the Smart Room Thermostats.
You can use your Room Thermostat in heating mode with boilers and similar heating units whereas you can use it in both heating and cooling mode with heat pumps.
You can automatically change the temperature of your home at the times you specify with the daily and weekly schedules you set in Room Thermostats with program mode.
You can use your Room Thermostat with Manual mode by manually setting it to the desired temperature without the need for any mode.
Using the location mode on the HT500S SMART Smart Room Thermostat, which works with the GLife application, you can decrease the temperature when you move away from your home or increase it when you approach your home.
You can set how close or how far away from your home the location mode will be active with the settings you will make from the GLife mobile application.
You can also determine the temperature range in which your Room Thermostat will operate in location mode from the GLife application.
Room Thermostat models with touch buttons have a key lock to prevent unintentional touches. In order to unlock the key lock, you need to press and hold the key specified in the user manual of your Room Thermostat.
Measurement accuracy is the temperature value measured by the Room Thermostat and this value is 0.1oC in all room thermostat models.
The operating sensitivity is the temperature difference by how many degrees the Room Thermostat will turn the heating/cooling unit on and off. This value can be adjusted between -2.0oC and 2.0oC in Room Thermostats with hysteresis setting. The factory setting is 0.5oC.
TPI Room Thermostats calculate and implement the operating sensitivity required for heating or cooling the environment using minimum energy.
Operating sensitivity of Smart Room Thermostats working with G-Life Smart application can be adjusted with hysteresis setting.
The sensors used in Room Thermostats are very sensitive. If you want to take the temperature of the thermometers in your living space as a reference, you need to calibrate your Room Thermostat. Temperature calibration setting can be made between -8oC and +8oC. The recommended temperature calibration setting is 0.0oC. Refer to the user manual of your Room Thermostat to set the temperature calibration setting.
When the “LB” warning appears on the display of your Room Thermostat, it means “low battery warning”. It is recommended to replace the batteries when this warning appears.
- Hysteresis setting means operating sensitivity setting. The Room Thermostat turns the heating/cooling unit on or off according to hysteresis positive and hysteresis negative values.
- In Room Thermostats with hysteresis setting, the operating sensitivity setting can be adjusted between -2.0oC and 2.0oC degrees.
Hysteresis positive and negative values can be set as separate temperatures.
- The factory setting of Room Thermostats with hysteresis setting is 0.5oC.
– TPI Room Thermostats do not have hysteresis setting.
- You can access the setting screen by pressing and holding the “On/Off” button for 3 seconds while your Room Thermostat is turned off. You can adjust hysteresis positive and hysteresis negative values here.
– TPI Room Thermostats do not have hysteresis setting. bulunmamaktadır.
The hysteresis positive factory setting of your Room Thermostat is 0.5oC. This value can be adjusted between “0.1oC ” and “2.0oC “. When you set the hysteresis positive value to 0.3oC, your Room Thermostat will send a command to your heating/cooling unit in case the room temperature increases 0.3oC above the set temperature value. For example, when you set your Room Thermostat to 22.0oC, in case the room temperature rises to 22.3oC, your heating unit will stop if the Room Thermostat is in heating mode and your cooling unit will start if it is in cooling mode.
– TPI Room Thermostats do not have hysteresis setting.
The hysteresis negative factory setting of your Room Thermostat is -0.5oC. This value can be adjusted between “-0.1oC ” and “-2.0oC “. When you set the hysteresis negative value to -0.3oC, your Room Thermostat will send a command to your heating/cooling unit in case the room temperature decreases 0.3oC below the set temperature value. For example, when you set your Room Thermostat to 22.0oC, in case the room temperature drops to 21.7oC, your heating unit will start if the Room Thermostat is in heating mode and your cooling unit will stop if it is in cooling mode.
– TPI Room Thermostats do not have hysteresis setting.
You can only control HT500S SMART and old series HT300S SMART products with GLife mobile application.
The control of the HT400 product via mobile application is provided with the HT400 application.
*Products controlled with the GLife mobile application must be powered by the plug.
- You can control the temperature of your home wherever you are in the world with the mobile application.
- You can easily create daily and weekly schedules with the mobile application.
- Using the location mode, you can decrease the temperature when you move away from your home or increase it when you approach your home.
- According to the date range selected from the mobile application, you can see the operating time of your heating unit, the temperature of your home and the outside air temperature graphically and get a historical report.
*Products controlled with the GLife mobile application must be powered by the plug.
*The operating sensitivity of the products controlled with the GLife mobile application is ±0.5 C and this value cannot be changed.
All of our new series Smart Room Thermostat models can be controlled with the G-Life SMART mobile application.
The products controlled with the G-Life SMART mobile application also have Wireless Room Thermostat feature and are battery operated.
*Except HT500S SMART, HT300S SMART (old series) and HT400 products.
- Wherever you are in the world, you can control the temperature of your home with the mobile application.
- You can easily create daily and weekly schedules with the mobile application.
- Thanks to its battery powered operation, you can place the room thermostat wherever you want in your home.
- You can adjust the operating sensitivity of your Smart Room Thermostat.
- Your Smart Room Thermostat measures sudden temperature changes in your home with the Open Window Detection feature and prevents unnecessary energy consumption by turning off the heating/cooling unit.
- It can work with Amazon Alexa and Google Assistant.
- G-Life SMART application is developed in cooperation with Tuya.
The “S” at the end of the product codes indicates that plastic glass called plexi is used in the product design. In this way, you can save energy and have a more elegant home decoration at the same time.
“SMART” in the product codes means that the product is a Smart Room Thermostat.
Wireless Room Thermostat keeps your home at the temperature you set by measuring the temperature of your home and allows you to turn your heating/cooling unit on or off whenever you want.
The Wireless Room Thermostat and the Receiver unit communicate via radio frequency. Thus, you can place your Wireless Room Thermostat wherever you want in your living space as recommended in the user manual.
Heating/cooling units are indexed to heat/cool the water in the installation due to their working principle. In a scenario where your heating/cooling unit is a boiler and is set to 50°C, your boiler runs until it brings the water circulating in the installation to 50°C, regardless of the temperature of your home, and stops when it reaches 50°C. Although everything seems normal here, this system causes your monthly bills to be about 35% higher.
When the Room Thermostat is used, your boiler still operates at 50°C, but when your home reaches the desired temperature, the Room Thermostat turns off your boiler regardless of the temperature of the circulating water and prevents your boiler from running unnecessarily.
The savings rate with the Room Thermostat varies according to personal use. For maximum savings with your Room Thermostat, it is recommended to keep the room temperature at 22°C during the day and 18°C at night. A 1°C temperature difference affects your bills by 8%.
– Factors such as sun and insulation affect the temperature of your home. By using the Room Thermostat, you can make your heating/cooling unit run less when your home is exposed to sunlight.
– By keeping the temperature of your home constant at 22°C during the day, you will not spend unnecessary fuel and you can prevent energy loss due to the heating of the walls.
– By setting your room thermostat to 18°C during sleeping hours, you can have a healthy sleep and save money.
– By decreasing the temperature of your home when you are out, you can prevent unnecessary energy consumption and spend less energy when you want to reheat your home.
If your heating/cooling unit has on-off connections, all of our Room Thermostat models are compatible. You can find the necessary information about your heating/cooling unit in the user manual of your heating/cooling unit or by calling the service center of your heating/cooling unit.
Wireless Room Thermostat and Receiver unit communicate via radio frequency. Thus, you can place your Wireless Room Thermostat wherever you want in your living space as recommended in the user manual.
Wired Room Thermostats are connected to the heating/cooling unit with a cable. Therefore, a cable connection must be made between the heating/cooling unit and the Wired Room Thermostat up to the area where you will place the Wired Room Thermostat.
Room Thermostats do not interfere with the domestic water temperature, the installation, or the natural gas meter.
Choosing a Room Thermostat depends on your usage needs and design preferences. You can choose the most suitable product for your budget and usage among our products with alternative options such as wired, wireless, programmable, and smart.
You can buy a Room Thermostat from GENERAL Life stores on Trendyol, Hepsiburada, Amazon Türkiye, N11, D&R, and İdefix e-commerce platforms or from other sellers.
You can do the installation and assembly of the product yourself by following the instructions in the user manual, or you can request help from your service center if you wish. Service centers provide assistance for a service fee.
You can place your Room Thermostat in a room that you use frequently in your living space, such as a living room. Avoid installing it in places where there is a lot of air circulation, such as doorways or windowsills. Also, do not place it close to heating/cooling units ( radiator, air conditioner, etc.), and do not place it in direct sunlight. We recommend that the Room Thermostat should be placed at a height of 150 cm from the floor. You can try several places to find where you can place the Room Thermostat.
The cable specification that must be used in the Receiver assembly of the Wireless Room Thermostat is 2*0.75.
The distance between the Wireless Room Thermostats and the Receiver should not exceed 20 meters or 2 floors.
The points to be considered in the placement of the receiver are as follows;
- The receiver and the heating/cooling unit must not physically contact.
- It should be protected from external substances such as liquid, dust, etc.
- It should not be mounted on metal surfaces.
- It should not be installed close to electrical cables and electronic equipment such as computers and television units.
- It should not be installed near large metal structures or other building materials using thin metal mesh such as special glass or special concrete.
- The distance between the room thermostat and the receiver should not exceed 20 meters or 2 floors.
- The receiver must be installed at least 50 cm away from the heating/cooling unit.
You can place your receiver at any location in your home by taking these points into consideration.
In Wireless Room Thermostats, when you press the manual (M) button on the Receiver unit, the LED starts blinking and the Room Thermostat is deactivated. In this case, your heating/cooling unit continues to operate according to the installation water temperature.
If one of the sun or snow symbols is blinking on the display of your Room Thermostat, it means that your Room Thermostat is running the heating/cooling unit.
You can also see the running status of the heating / cooling unit from the LED meanings on the Receiver of the Wireless Room Thermostats.
You can use your Room Thermostat in heating mode with boilers and similar heating units whereas you can use it in both heating and cooling mode with heat pumps.
You can automatically change the temperature of your home at the times you specify with the daily and weekly schedules you set in Room Thermostats with program mode.
You can use your Room Thermostat with Manual mode by manually setting it to the desired temperature without the need for any mode.
Room Thermostat models with touch buttons have a key lock to prevent unintentional touches. In order to unlock the key lock, you need to press and hold the key specified in the user manual of your Room Thermostat.
- Measurement accuracy is the temperature value measured by the Room Thermostat and this value is 0.1oC in all room thermostat models.
- The operating sensitivity is the temperature difference by how many degrees the Room Thermostat will turn the heating/cooling unit on and off. This value can be adjusted between -2.0oC and 2.0oC in Room Thermostats with hysteresis setting. The factory setting is 0.5oC.
- TPI Room Thermostats calculate and implement the operating sensitivity required for heating or cooling the environment using minimum energy.
The sensors used in Room Thermostats are very sensitive. If you want to take the temperature of the thermometers in your living space as a reference, you need to calibrate your Room Thermostat. Temperature calibration setting can be made between -8oC and +8oC. The recommended temperature calibration setting is 0.0oC. Refer to the user manual of your Room Thermostat to set the temperature calibration setting.
When the “LB” warning appears on the display of your Room Thermostat, it means “low battery warning”. It is recommended to replace the batteries when this warning appears.
TPI technology is designed to ensure you get the best possible energy efficiency from your heating/cooling system. It measures and applies the best possible timings to reach and maintain the set temperature in your home.
Thanks to advanced TPI artificial intelligence technology, your Room Thermostat adapts to the temperature change of its environment. By creating a general temperature map of your home, it learns when the desired room temperature is reached and how this temperature is maintained.
Based on this information, it calculates how long your heating/cooling unit should run and provides higher savings and comfort compared to On/Off Room Thermostats.
Room Thermostats with TPI technology predict when the temperature of your home will increase above or decrease below the set temperature and turn the heating unit on and off accordingly. This ensures that your home stays at the set temperature with minimal deviations up and down.
Thanks to the advanced artificial intelligence technology in the product software, it adapts to the temperature change of its environment. By creating a general temperature map of your home, it learns how long it takes to reach the desired room temperature and how this temperature is maintained. Thus, it provides minimum energy consumption by calculating how long your heating/cooling unit should run.
In the room thermostats without TPI, the heating/cooling unit runs continuously until it exceeds the set temperature value and stops. When it drops below the set temperature by a certain amount, the heating/cooling unit starts again. This creates larger temperature fluctuations and less energy control.
TPI Room Thermostats, on the other hand, provide higher savings and comfort with its advantages compared to On/Off Room Thermostats.
- If the placement of TPI Room Thermostats is changed, the learning process will start again. The learning process should be considered as 7 days.
- If TPI Room Thermostats are de-energized (battery replacement), the learning process will start again. The learning process should be evaluated as 7 days.
- Hysteresis setting means operating sensitivity setting. The Room Thermostat turns the heating/cooling unit on or off according to hysteresis positive and hysteresis negative values.
- In Room Thermostats with hysteresis setting, the operating sensitivity setting can be adjusted between -2.0oC and 2.0oC degrees.
- Hysteresis positive and negative values can be set as separate temperatures.
- The factory setting of Room Thermostats with hysteresis setting is 0.5oC.
– TPI Room Thermostats do not have hysteresis setting..
- You can access the setting screen by pressing and holding the “On/Off” button for 3 seconds while your Room Thermostat is turned off. You can adjust hysteresis positive and hysteresis negative values here.
– TPI Room Thermostats do not have hysteresis setting.
The hysteresis positive factory setting of your Room Thermostat is 0.5oC. This value can be adjusted between “0.1oC ” and “2.0oC “. When you set the hysteresis positive value to 0.3oC, your Room Thermostat will send a command to your heating/cooling unit in case the room temperature increases 0.3oC above the set temperature value. For example, when you set your Room Thermostat to 22.0oC, in case the room temperature rises to 22.3oC, your heating unit will stop if the Room Thermostat is in heating mode and your cooling unit will start if it is in cooling mode.
– TPI Room Thermostats do not have hysteresis setting.
The hysteresis negative factory setting of your Room Thermostat is -0.5oC. This value can be adjusted between “-0.1oC ” and “-2.0oC “. When you set the hysteresis negative value to -0.3oC, your Room Thermostat will send a command to your heating/cooling unit in case the room temperature decreases 0.3oC below the set temperature value. For example, when you set your Room Thermostat to 22.0oC, in case the room temperature drops to 21.7oC, your heating unit will start if the Room Thermostat is in heating mode and your cooling unit will stop if it is in cooling mode.
– TPI Room Thermostats do not have hysteresis setting.
The “S” at the end of the product codes indicates that plastic glass called plexi is used in the product design. In this way, you can save energy and have a more elegant home decoration at the same time.
“RF” in the product codes means that the product is a Wireless Room Thermostat.
A Wired Room Thermostat measures the temperature of your home, keeps your home at the temperature you set, and allows you to turn your heating/cooling unit on or off whenever you want.
Wired Room Thermostats are connected to the heating/cooling unit with a cable. Therefore, a cable connection must be made between the heating/cooling unit and the Wired Room Thermostat up to the area where you will place the Wired Room Thermostat.
Heating/cooling units are indexed to heat/cool the water in the installation due to their working principle. In a scenario where your heating/cooling unit is a boiler and is set to 50°C, your boiler runs until it brings the water circulating in the installation to 50°C, regardless of the temperature of your home, and stops when it reaches 50°C. Although everything seems normal here, this system causes your monthly bills to be about 35% higher.
When the Room Thermostat is used, your boiler still operates at 50°C, but when your home reaches the desired temperature, the Room Thermostat turns off your boiler regardless of the temperature of the circulating water and prevents your boiler from running unnecessarily.
The savings rate with the Room Thermostat varies according to personal use. For maximum savings with your Room Thermostat, it is recommended to keep the room temperature at 22°C during the day and 18°C at night. A 1°C temperature difference affects your bills by 8%.
– Factors such as sun and insulation affect the temperature of your home. By using the Room Thermostat, you can make your heating/cooling unit run less when your home is exposed to sunlight.
– By keeping the temperature of your home constant at 22°C during the day, you will not spend unnecessary fuel and you can prevent energy loss due to the heating of the walls.
– By setting your room thermostat to 18°C during sleeping hours, you can have a healthy sleep and save money.
– By decreasing the temperature of your home when you are out, you can prevent unnecessary energy consumption and spend less energy when you want to reheat your home.
If your heating/cooling unit has on-off connections, all of our Room Thermostat models are compatible. You can find the necessary information about your heating/cooling unit in the user manual of your heating/cooling unit or by calling the service center of your heating/cooling unit.
Wireless Room Thermostat and Receiver unit communicate via radio frequency. Thus, you can place your Wireless Room Thermostat wherever you want in your living space as recommended in the user manual.
Wired Room Thermostats are connected to the heating/cooling unit with a cable. Therefore, a cable connection must be made between the heating/cooling unit and the Wired Room Thermostat up to the area where you will place the Wired Room Thermostat.
Room Thermostats do not interfere with the domestic water temperature, the installation, or the natural gas meter.
Choosing a Room Thermostat depends on your usage needs and design preferences. You can choose the most suitable product for your budget and usage among our products with alternative options such as wired, wireless, programmable, and smart.
You can buy a Room Thermostat from GENERAL Life stores on Trendyol, Hepsiburada, Amazon Türkiye, N11, D&R, and İdefix e-commerce platforms or from other sellers.
You can do the installation and assembly of the product yourself by following the instructions in the user manual, or you can request help from your service center if you wish. Service centers provide assistance for a service fee.
You can place your Room Thermostat in a room that you use frequently in your living space, such as a living room. Avoid installing it in places where there is a lot of air circulation, such as doorways or windowsills. Also, do not place it close to heating/cooling units ( radiator, air conditioner, etc.), and do not place it in direct sunlight. We recommend that the Room Thermostat should be placed at a height of 150 cm from the floor. You can try several places to find where you can place the Room Thermostat.
The cable specification that must be used in the Receiver assembly of the Smart Room Thermostat is 2*0.75.
Wired Room Thermostats are connected to the heating/cooling unit with a cable. Thus, there is no distance restriction.
If one of the sun or snow symbols is blinking on the display of your Room Thermostat, it means that your Room Thermostat is running the heating/cooling unit.
You can use your Room Thermostat in heating mode with boilers and similar heating units whereas you can use it in both heating and cooling mode with heat pumps.
You can automatically change the temperature of your home at the times you specify with the daily and weekly schedules you set in Room Thermostats with program mode.
You can use your Room Thermostat with Manual mode by manually setting it to the desired temperature without the need for any mode.
Room Thermostat models with touch buttons have a key lock to prevent unintentional touches. In order to unlock the key lock, you need to press and hold the key specified in the user manual of your Room Thermostat.
- Measurement accuracy is the temperature value measured by the Room Thermostat and this value is 0.1oC in all room thermostat models.
- The operating sensitivity is the temperature difference by how many degrees the Room Thermostat will turn the heating/cooling unit on and off. This value can be adjusted between -2.0oC and 2.0oC in Room Thermostats with hysteresis setting. The factory setting is 0.5oC.
- TPI Room Thermostats calculate and implement the operating sensitivity required for heating or cooling the environment using minimum energy.
The sensors used in Room Thermostats are very sensitive. If you want to take the temperature of the thermometers in your living space as a reference, you need to calibrate your Room Thermostat. Temperature calibration setting can be made between -8 and +8 C. The recommended temperature calibration setting is 0.0oC. Refer to the user manual of your Room Thermostat to set the temperature calibration setting.
When the “LB” warning appears on the display of your Room Thermostat, it means “low battery warning”. It is recommended to replace the batteries when this warning appears.
TPI technology is designed to ensure you get the best possible energy efficiency from your heating/cooling system. It measures and applies the best possible timings to reach and maintain the set temperature in your home.
Thanks to advanced TPI artificial intelligence technology, your Room Thermostat adapts to the temperature change of its environment. By creating a general temperature map of your home, it learns when the desired room temperature is reached and how this temperature is maintained.
Based on this information, it calculates how long your heating/cooling unit should run and provides higher savings and comfort compared to On/Off Room Thermostats.
Room Thermostats with TPI technology predict when the temperature of your home will increase above or decrease below the set temperature and turn the heating unit on and off accordingly. This ensures that your home stays at the set temperature with minimal deviations up and down.
Thanks to the advanced artificial intelligence technology in the product software, it adapts to the temperature change of its environment. By creating a general temperature map of your home, it learns how long it takes to reach the desired room temperature and how this temperature is maintained. Thus, it provides minimum energy consumption by calculating how long your heating/cooling unit should run.
In the room thermostats without TPI, the heating/cooling unit runs continuously until it exceeds the set temperature value and stops. When it drops below the set temperature by a certain amount, the heating/cooling unit starts again. This creates larger temperature fluctuations and less energy control.
TPI Room Thermostats, on the other hand, provide higher savings and comfort with its advantages compared to On/Off Room Thermostats.
- If the placement of TPI Room Thermostats is changed, the learning process will start again. The learning process should be considered as 7 days.
- If TPI Room Thermostats are de-energized (battery replacement), the learning process will start again. The learning process should be evaluated as 7 days.
- Hysteresis setting means operating sensitivity setting. The Room Thermostat turns the heating/cooling unit on or off according to hysteresis positive and hysteresis negative values.
- In Room Thermostats with hysteresis setting, the operating sensitivity setting can be adjusted between -2.0oC and 2.0oC degrees.
- Hysteresis positive and negative values can be set as separate temperatures.
- The factory setting of Room Thermostats with hysteresis setting is 0.5oC.
– TPI Room Thermostats do not have hysteresis setting.
- You can access the setting screen by pressing and holding the “On/Off” button for 3 seconds while your Room Thermostat is turned off. You can adjust hysteresis positive and hysteresis negative values here.
– TPI Room Thermostats do not have hysteresis setting.
The hysteresis positive factory setting of your Room Thermostat is 0.5oC. This value can be adjusted between “0.1oC ” and “2.0oC “. When you set the hysteresis positive value to 0.3oC, your Room Thermostat will send a command to your heating/cooling unit in case the room temperature increases 0.3oC above the set temperature value. For example, when you set your Room Thermostat to 22.0oC, in case the room temperature rises to 22.3oC, your heating unit will stop if the Room Thermostat is in heating mode and your cooling unit will start if it is in cooling mode.
– TPI Room Thermostats do not have hysteresis setting.
The hysteresis negative factory setting of your Room Thermostat is -0.5oC. This value can be adjusted between “-0.1oC ” and “-2.0oC “. When you set the hysteresis negative value to -0.3oC, your Room Thermostat will send a command to your heating/cooling unit in case the room temperature decreases 0.3oC below the set temperature value. For example, when you set your Room Thermostat to 22.0oC, in case the room temperature drops to 21.7oC, your heating unit will start if the Room Thermostat is in heating mode and your cooling unit will stop if it is in cooling mode.
– TPI Room Thermostats do not have hysteresis setting.
The “S” at the end of the product codes indicates that plastic glass called plexi is used in the product design. In this way, you can save energy and have a more elegant home decoration at the same time.