How Do We Save Money When Using Air Conditioner?

Air conditioners, which are no longer a luxury, are in almost every home, especially in hot areas. During the summer months, careless consumers face a fluffy electricity bill. So what is the effect of air conditioning on the electricity bill and how much can it be reduced?

Although it is said that the installation of the purchased air conditioners in the right place is known as the most effective way of saving, it is possible to save a lot more with tricks that you will not think of. The correct air-conditioning usage and the arrangement of the environment according to the air conditioner, are also contributing factors. If we talk about other ways of saving:

• First make sure that the installation of the air conditioner is in the right place.

• Ensure that air conditioning is suitable for the environment. Large and small air conditioners can consume more energy.

• Controlling temperature with electronic thermostat saves efficiency by up to 30%.

• Do well to insulate the environment where the air conditioner is used; keep the doors and windows closed.

• If you do not intend to use your air conditioner for a long time, close the circuit breaker.

• When the air conditioner is in cooling mode, cover the outdoor unit to make a shade with a canopy which does not prevent airflow.

• Be careful not to use other electrical appliances when your air conditioner is in cooling mode. These tools increase the energy that the air conditioner will spend by spreading heat to the environment.

• Clean dust arrester filters at regular intervals and prevent airflow from being blocked.

• Replace your air-conditioners that are over ten years old. Older air-conditioners spend 40% more energy compared to new air-conditioners for the same cooling performance.

• Operate your air-conditioner in dehumidification mode on damp, non-hot days. Turn off your air-conditioner if it is cool outside.

• Prefer air-conditioners with programming mode. Schedule your air conditioner to close when you are not in the environment and to turn on when you are.

• Make sure that the air inlet outlet of the indoor unit of your air conditioner is not covered with curtains, furniture, etc.

• Prevent the environment from cooling down. Your air-conditioner consumes more energy in these situations.

• Prevent sun rays from entering the area directly when your air-conditioner is working.

• Clean your filters at intervals specified in the instruction manual.

• Adjust the vertical and horizontal wing direction of the air conditioner to ensure that room temperature and airflow are evenly distributed.

• Do not do any maintenance without consulting your authorized service. Wrong applications can cause big expenses.

But most importantly, make your air-conditioner smart with General Life and save up to 40% of your electricity consumption!

What Is A Room Thermostat And How To Use It?

You decide to buy room thermostat. But you hesitate on terms of its features, and uninformed of its benefits. In that case, this article is totally for you!

Room thermostat is used to set desired room temperature by informing used heating appliances. There are wireless, wired, programable and remote control models of room thermostats. Room Room thermostat sends information for operate of heating appliance until arrives to desired temperature by measuring ambient temperature. And when the ambient temperature arrives to desired, room thermostat informs to heating appliance about arrived desired temperature and issues a command it for have a break of heating. For example, if you adjust your room thermostat to 23 degrees, your boiler stops to heating when the ambient of room which thermostat placed reached to 23 degrees.

Room thermostats provide both comfort and saving on using fuel. You should try the following methods for best savings.

You decided to use room thermostat and you connected your room thermostat to the heating system. Primarily, the temperature degree of hermatic or condensing boiler should be between 55-56 degrees. The purpose of that high degree is reaching to desired temperature immediately on house or place and stopping of boiler.

You should keep the thermostats approximately on 22 degrees and decrease till 18-19 degrees at night. You should ventilate your home at the morning hours and you should be sure that your room thermostat is closed.

The room thermostat used for combi boilers and heating devices allows you to easily adjust the temperature of your room to the desired degree. The task of the room thermostat is to keep the temperature constant when the temperature of the room reaches the desired degree and to prevent the boiler from working too much.

Wireless room thermostats consist of a combination of two devices, a receiver (modem) and a transmitter (room thermostat). First of all, the receiver device must be installed in the boiler. There are LED lights on it that provide information about the connection status with the boiler. The transmitter device is a thermostat that can be mounted on the desired wall of the house or that you can use with a table apparatus, which allows you to easily set the temperature, measure the room temperature and ensure that the boiler works or not. You can set the degree of room temperature through the room thermostat as you like.

Room thermostats can provide communication between two devices by using different communication units. This communication can be Wi-Fi, radio frequency and wired connection. These situations differ for each device model. In order to choose the most suitable room thermostat for you, you should consider elements such as the mode of use, the desired positioning location, the desired extra modes.

In a boiler with a room thermostat, all you have to do is set the desired temperature through the device. When the room temperature reaches the degree you have set, the boiler turns off. When it falls below the degree you have set due to a heat loss, the boiler continues to heat the environment until it reaches the desired degree again. Thus, you will not need to constantly update. As you can control the room temperature from the LED panel on the thermostat, you will also save on natural gas due to the automatic management of the thermostat.

Things To Be Considered:

Without a battery or with a dead battery, the thermostat will not work. Therefore, when you see the battery depletion warning on the device, you should replace the battery. In the event of a power outage with smart room thermostats, the room thermostat continues to control the boiler according to the last set temperature. When the electricity is turned on again, the connection takes place again.

How to the Boiler be Used in Autumn?

In the autumn season, which we are preparing to welcome, the weather often becomes changeable. Although the autumn months are early for the use of boilers, the duration of the transition seasons has decreased due to global warming and the need for boilers has begun to increase.

If you are going to use a boiler in the fall, first of all, remember that you have been running your boiler to obtain only hot water since the previous year. Before reactivating the heating function of the boiler, do not forget to carry out your annual boiler maintenance.

Remember that the air temperature can be changeable during the day, since winter has not yet come. If you run your boiler at a minimum level, you will have less natural gas consumption and you will soften the general air of the house against the cooling weather. As the weather continues to cool down, you can gradually continue to increase the degree of the boiler.

If you are planning to buy a new boiler before winter comes, autumn is a suitable season to buy a boiler. As the winter season approaches, you can get the best device you need by evaluating the boiler opportunities of many brands.